TS Machinery - Specialize In Fabricating Shot And Sand Blasting Equipment
For Surface Treatment Industry More Than 10 Years.
|Place of Origin:||CHINA|
|Minimum Order Quantity:||1 Set|
|Packaging Details:||PE+ABF+wooden case|
|Delivery Time:||10-15 work day|
|Supply Ability:||15 Sets per month|
|Voltage:||380V ±10% 50HZ Three Phase||Working Pressure:||4-7bar|
|Working Efficiency:||1-3m²/h||Warranty:||1 Year|
electric blasting machine,
vacuum sandblasting equipment
Dust Free Portable Vacuum Blasting Machine Blast Metal Structure Exported To Indonesia
Use vacuum blasting machine can avoid the environmental pollution of dust and the danger of workers’ healthy. The difference between vacuum blasting machine and traditional portable blasting pot is recycle system. When the machine is blasting, and it is recycling at the same time. We use special brush head, they are fit all (flat, cornered, radius) surfaces. The special brush head can recycle the blasted abrasive and dust, they are recycled into the separator. The abrasive is fell into the pressure tank and the dust is absorbed into the dust collector. The dust collector is automatic filter cleaning system,easy disposal of collected dust in a plastic bag.
This machine couldn’t occupy ventilation and special site(except the special condition). The total unit(including fan and dust collector) can be movable easily. It can save operating area and cost.
Equipped with adjust air valve, which can adjust intake air.
Equipped with special abrasive control valve, it can adjust the air flow and sand flow evenly. So we can get the suitable rate of air and abrasive, improve the working efficiency and quality.
Equipped with automatic filter cleaning system, easy operation and saver time and strength.
Reliable main machine parts, long lifetime and easy maintenance.
|Voltage||380V ±10% 50HZ three phase|
|The dia of nozzle||6mm|
|Working type||Automatic recycle type|
|Air consumption||2-3m³/min(22kw air compressor)|
|Usable abrasive||Bearing steel grit G50|
A. Check the recycle system, electrical system and spare parts, if they are broken, repair or change them.
B. Check every pressure gauge regularly.
C. Check if the hose, tube and cable protective layer is broken, change them if anything is broken.
D. Check the usage of fan, add lubricant in the fan regularly.
E, If the machine is under the status of rest, please put the machine in the area of dry and ventilated places, avoid direct sunlight.
Failure and Troubleshooting
|Small compressed air||Small air pressure in the regulator valve.||Rotate regulator valve, adjust the air pressure.|
|Continuous air flow with no sand or discontinuous sand||
|Abrasive blasted is uneven||
|Low recycle system efficiency||
|Too much blasted sand||
|Low working efficiency||
Contact Person: tina