TS Machinery - Specialize In Fabricating Shot And Sand Blasting Equipment
For Surface Treatment Industry More Than 10 Years.
|Place of Origin:||China|
|Minimum Order Quantity:||1 set|
|Packaging Details:||Pallet / Wooden + PE + ABF,|
|Delivery Time:||30 days|
|Supply Ability:||10 sets per month|
|Qty Of Gun:||7 Pcs||Dust Collector:||Filters|
|Qty Of Filter:||4 Pcs||Type:||Automatic Movable|
|Warranty:||1 Year||Voltage:||3 Phase-380V; 50HZ,customized|
|Noise Level:||≤85dBA||Dust Emission:||≤80mg/m3|
automatic blasting machine,
media blasting machine
TS1011-7A Pin Thread Of Oil Pipe Automatic Sand Blasting Machine Movable Type
TS1011-7A automatic sand blast machine is designed for cleaning pin thread of oil pipe according to your product features,blasting requirements and factory existing pipe transport conveyor. To remove the burr(oxide coating), pretreatment of surface finishing, electroplate, and painting; at the same time, improve the adhesion and corrosion resistance of coating.
The machine is with siphon cabinet, that is, uses a compressed air stream inside a siphon blast gun to create a vacuum in a chamber creating a negative pressure, pulling the abrasive into the nozzle and spray out to achieve the effect of sand blasting processing.
This machine is mainly composed of sandblasting cabinet, front vestibule, gun moving mechanism, blast guns, blower system, air blow device, machine moving mechanism, separator, dust collector, electrical control system, etc.
Machine Footprint : L5000mm * W1170mm * H3600mm
Compressed Air Consumption: 7m3/min/0.5Mpa
Working Speed Required
For example, process diameter φ114 pipe, working productivity is about 1pcs/0.5min (the actual effect is based on the debugging).
Machine Easy to Operate Numbers of Operator Required: 1 person
Before processing begins, the worker shall first check the abrasive storage hopper to see if the abrasive is adequate, close all doors and open the main power switc
Operator stand in the operation area, push the button of ‘machine forward”, when it reaches to the specified position, then start the dust collector and pipe rotation system, finally start the sandblasting button; There is a timer, when the sandblasting job is finished. The machine automatically stop and move out.
Several mechanisms cooperate with each other to ensure that the steel tube is uniformly sandblasted in place. All the above operations are carried out under manual conditions.
If customer enter the long-term batch production, only need to start the automatic button, all the agencies start up.
How does Automatic Condition work?
start DC fan first,
when the steel pipe is ready and gives a signal to sand blasting machine,
the machine automatically moves towards into position (the distance can be manually set and adjusted), and send a signal to pipeline line,
the pipe starts to rotate automatically.
sandblasting machine starts to blast (sand blasting time can be adjusted), when the sandblasting time is up,
air blowing working
and then feedback a signal to the steel pipe transmission line, steel tube rotation stop,
machine moves out to the opposite direction,
above action cycle work.
Foreign Capital Enterprise HSC Seamless Steel Pipe Company Limited 2 sets; Vallourec Tianda (Anhui) Co., Ltd 2sets;
National Enterprise Shanghai Baosteel 18sets; Yantai Baosteel 4sets; Daqing Oilfield 2 sets
Public Company Jiangsu Changbao 10sets; Changbao Plesson 10sets; Baoji 9, Xi'an 9sets; Shanghai Fangzheng long 2sets; Shanghai Baodi 2sets; Xi'an Changhe Steel Pipe 4 sets;
Contact Person: tina