TS Machinery - Specialize In Fabricating Shot And Sand Blasting Equipment
For Surface Treatment Industry More Than 10 Years.
|Place of Origin:||China|
|Minimum Order Quantity:||1 set|
|Packaging Details:||Pallet / Wooden + PE + ABF,|
|Delivery Time:||15-20 days|
|Supply Ability:||30 sets per month|
|Material:||Fiber Glass||Type:||Small Wet Type|
|HS Code:||8424300000||Voltage:||3Ph 380V 50Hz|
wet abrasive blasting equipment,
pressure sandblast cabinet
Fiber Glass Wet Type Sandblasting Machine Small Operating Cabinet
Wet Blasting Cabinet is a unique finishing process. It is the only finishing process that can degrease, deburr, surface condition and leave a surgically clean surface in one operation
whatever your surface treatment requirements, no other machine builder offers you more choices.
The heart of the wet blasting system is our proprietary slurry pump, but our advanced wet-blast guns, our steeply sloped slurry hoppers and our field-proven engineered designs work in combination to provide superior performance and deliver the unique benefits of wet blast surface treatment technology.
Standard Cabinet Models:
|Model||Working cabinet size(mm)||Working Pressure||Air Consumption(Approx)||Materials||Pump Power||Voltage|
|TS9065W||900x650x600||3-7bar(kg/cm2)||1.5m³/min||Fiber Glass/ Stainless steel||1.5kw||Single Phase 220V(230V) 50Hz(60Hz) 3Ph 380V(410V/440V) 50Hz(60Hz)|
Note: Any models can be decided by your products details. And the specifications are also different.
Working Cabinet Inside View:
Sandblasting Gun Picture:
Wet Blasting Cabinet Working Principles:
The water/media slurry is contained within the wet blasting cabinet sump.
Delivery of the slurry to the manual blast nozzle is via a glandless polyurethane pump and associated hose located inside the wet blasting machine.
Compressed air is added at the blast nozzle to accelerate the slurry and create the cleaning effect.
After contact with the component, the slurry then drains back into the sump creating a re-circulating system.
This equipment is use the grinding pump and compressed air as the drive power ,with the grinding as media ,ejection of the work-piece machining device . It has the following functions .
1, Clean up the heat treatment, welding parts, castings, forgings, oxide scale, residual salt and slag, cleaning quality can be achieved Sa3.0 level.
2, Cleaning machine parts micro burrs, surface residues and so on.
3, Reducing roughness Ra value.
4, It can be used as surface-coating, pre-treatment prior to the plating process, the active surface obtained, improving coating, coating adhesion.
5, It can be used for other processing methods difficult to complete high accuracy, small roughness Ra value, light decoration processing complex shape parts.
6, t can be used to improve the physical and mechanical properties of the surface, such as changes in surface stress, improve lubrication conditions with even pieces.
7, During exercise reduce couples noise.
Any updates pls feel free to contact us!
Contact Person: tina