TS Machinery - Specialize In Fabricating Shot And Sand Blasting Equipment

For Surface Treatment Industry More Than 10 Years.

Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home ProductsVacuum Blasting Machine

80 Gallon Auto Sandblasting Machine For Removing Rust Cleaning Paint Welding Scale

80 Gallon Auto Sandblasting Machine For Removing Rust Cleaning Paint Welding Scale

    • 80 Gallon Auto Sandblasting Machine For Removing Rust Cleaning Paint Welding Scale
    • 80 Gallon Auto Sandblasting Machine For Removing Rust Cleaning Paint Welding Scale
  • 80 Gallon Auto Sandblasting Machine For Removing Rust Cleaning Paint Welding Scale

    Product Details:

    Place of Origin: CHINA
    Brand Name: TAISHENG
    Certification: ISO9001-2005
    Model Number: TS-300L

    Payment & Shipping Terms:

    Minimum Order Quantity: 1 Set
    Price: Negotiation
    Packaging Details: PE+ABF+wooden case
    Delivery Time: 10-15 work day
    Payment Terms: T/T
    Supply Ability: 15 Sets per month
    Contact Now
    Detailed Product Description
    Product Name: Product Name Volume: 80 Gallon
    Dimension: 2100×1100×2300(L*W*H) Weight: 600kg
    Voltage: 380V 50HZ Working Pressure: 4-7bar
    High Light:

    electric blasting machine

    ,

    vacuum sandblasting equipment

    80 Gallon Vacuum Blasting Machine For Removing Rust Cleaning Paint Welding Scale

     

    Description

    Vacuum, or dust free blasting is ideal for spot repairs, and has high demand on the environment which should be dust free and abrasive pollution is prohibited.

     

    The blasting process is happened in a sealed chamber by the brush head, curve or flat. Dust and abrasives are immediately vacuumed by a powerful suction fan. The used abrasives are recycled to the separator and silo, the dust is collector by the cartridge filter. TS machinery vacuum blasting is a safe blasting solution for confined or critical areas (with a lower working speed compared to “open” blasting).

     

    Application

    The equipment can be widely used in petrochemical industry, metal structure, ship repair, pipeline power, aerospace aviation, locomotive manufacturing and other industries. It is an ideal tool for pre-processing of various steel structures.

     

    Benefits if using TS vacuum blasting,

    1. 100% dust free operation because of fully automated vacuum start/stop sequence

    2. Clean, abrasive free surface after blasting

    3. Automatic filter cleaning system

    4. Unit can be movable easily

    5. Wide range of brushes to fit all (flat, cornered, radius) surfaces

    6. Working radius is 10m(the maximum radius could be 40m). The cleanliness is up to Grade Sa2.5-Sa3

    7. Handle controlled switch(Electric control DC24V)

    8. Adopts special control circuit, and the working pressure can be adjusted arbitrarily in the range of 0.2kpa - 0.8kpa, which can meet the requirement of sand blasting process for different workpieces.

     

    Technical Specification

    Model
    TS-300L
    Size 2100x1100x2300(L*W*H)

    Weight

    About 600kg

    Voltage

    380V 50HZ

    The dia of nozzle

    8mm

    Working pressure

    4-7bar

    Working radius

    10m

    Working efficiency

    10-15m²/h

    Working type

    Automatic recycle type

    Air consumption

    3-6m³/min(recommend to match with 37kw air compressor)

    Fan power

    2x4kw

    Filtration area

    About 20m²

    Cleaning level

    Sa2.5-3

    Roughness

    40-70μm

    Usable abrasive

    G25-150 grits

     

     
    Brushes
    80 Gallon Auto Sandblasting Machine For Removing Rust Cleaning Paint Welding Scale 0
     
    You can use it by hand
    80 Gallon Auto Sandblasting Machine For Removing Rust Cleaning Paint Welding Scale 1
     
    or mounted on blasting gun rack like this
    80 Gallon Auto Sandblasting Machine For Removing Rust Cleaning Paint Welding Scale 280 Gallon Auto Sandblasting Machine For Removing Rust Cleaning Paint Welding Scale 3
     
    Before and After
    80 Gallon Auto Sandblasting Machine For Removing Rust Cleaning Paint Welding Scale 4
     

    Failure and Troubleshooting

    Failure Probable Cause Troubleshooting
    Small compressed air Small air pressure in the regulator valve. Rotate regulator valve, adjust the air pressure.
    Continuous air flow with no sand or discontinuous sand
    • Too little abrasive.
    • The abrasive is wet or piece in the tank.
    • The abrasive valve isn’t opened or jammed.
    • The size of abrasive is too big to block the nozzle.
    • Feed abrasive.
    • Change the abrasive.
    • Open abrasive valve to make the abrasive blast repeatedly. Or take down the abrasive valve to check.
    • Please use thin iron rod remove the abrasive.
    Abrasive blasted is uneven
    • Too little abrasive.
    • Low compressed air pressure.
    • Nozzle is blocked.
    • Wet abrasive.
    • Abrasive valve and air valve aren’t adjusted correctly.
    • Add abrasive.
    • Adjust high air compressor pressure.
    • Remove the plug.
    • Remove the wet abrasive, add the dry abrasive, check if there is water in gas pipeline.
    • Adjust two valves.
    Low recycle system efficiency
    • Checking if it leaks out in the connection of sealing and recycle tube.
    • Too much dust in the filter.
    • The brush head and protective tube are broken.
    • Eliminate the connection air leak.
    • Clean the filter by the pulse switch. If the filter is very dirty, please take down the filter from machine to clean and keep dry status. If the filter is broken, please change it.
    • Change the new brush head and protective tube.
    Too much blasted sand
    • Please check if the abrasive valve opening is too large.
    • Please check if the spool in the abrasive valve is in a serious wear.
    • Please adjust the abrasive valve opening again.
    • Please change the spool or abrasive valve.
    Low working efficiency
    • Please check if the working pressure is ok.
    • Please check if nozzle wear.
    • Bad performance of separator, most dust flow into the pressure tank.
    • Adjust the pressure between 0.4 to 0.8Mpa.
    • Please change the new nozzle.
    • Please check if the inside of separator wear.

    Contact Details
    Changzhou Taisheng Machinery Equipment Co.,Ltd.

    Contact Person: tina

    Send your inquiry directly to us (0 / 3000)

    Other Products